SPC Flooring Manufacturer Malaysia | Enoch Building Materials

Malaysia-made SPC Flooring | West Malaysia

SPC Flooring Manufacturer in Malaysia

We manufacture our SPC flooring range at our own factory in Malaysia and provide SPC supply or supply-and-installation services for projects across West Malaysia.

At Enoch Building Materials Group Sdn Bhd, we help contractors, developers, retailers, designers and property owners select an actual SPC model, confirm its specifications and discuss the appropriate order or installation scope.

  • Our Malaysia-made SPC range includes 5mm, 6.5mm and Terrazzo series.
  • Compare named flooring models, colours and product information before ordering.
  • Discuss supply or installation requirements in Selangor, Kuala Lumpur, Johor, Penang and other West Malaysia locations.
Discuss SPC flooring with Enoch
Selection of Enoch SPC wood-effect flooring finishes

Our SPC selection includes light, grey and darker wood-effect finishes. The right choice starts with a model code and its matching product information.

01 / Explore the collection

Explore Enoch's Malaysia-made SPC flooring

Which SPC boards can you inspect? Start with our named product listings, where you can compare the actual decorative finishes and identify the model you want to discuss.

Stone Plastic Composite (SPC) flooring uses a dense, rigid core made with mineral-based materials and stabilisers. Its construction is intended to provide dimensional stability, while the decorative surface creates a wood-look or stone-look finish. Actual construction and performance must be confirmed for the selected model.

Below are four examples from our SPC catalogue. They illustrate the finishes available across three series, rather than representing the full catalogue or confirming current stock.

SPC 5mm Series
SPC 6.5mm Series
Browse our SPC flooring series
Looking for LVT instead? Our LVT 5MM Series is a separate flooring category. It should not be treated as SPC or assumed to share the same manufacturing details and specifications.

Not sure which finish or construction to choose? Share the model codes you are considering through our SPC flooring enquiry form . We can help narrow the options against your project requirements.

02 / Manufacturing and enquiry

What does buying from Enoch's Malaysia factory mean?

Our own factory in Malaysia manufactures the SPC range featured in our catalogue. Our Enoch Malaysia sales team handles product and order enquiries.

This gives buyers a clear starting point: identify an Enoch SPC model, review its individual product information and discuss the quantity, project location and required scope with us.

Factory ownership does not replace product specification checks or site assessment. Before confirming an order, we still need to establish the exact SKU, required quantity, intended use and whether installation services are needed.

Interior view of Enoch flooring production facility

Our factory image shows an industrial production environment with processing equipment. For procurement, the important next step is to connect the required flooring finish to its exact product code and specifications.

Malaysia-made SPC range

Our owned Malaysia factory manufactures the SPC range shown in our catalogue. Buyers can begin with our 5mm, 6.5mm and Terrazzo series, then identify the exact product required.

Model-specific enquiry

Our sales team can discuss a nominated SPC model alongside its quantity, intended room, project location and supply or installation requirements before the order scope is agreed.

03 / Product specifications

Which model specifications should you compare?

A 5mm or 6.5mm series name is a useful catalogue reference, but the exact SPC model determines what you should specify and order.

Compare the selected product's thickness, wear layer, plank dimensions, backing construction, installation instructions and relevant test documentation where required for the project.

These details help contractors, designers and owners assess suitability, plan quantities and avoid assuming that every board in a series has identical construction.

Comparison of SPC series labels and exact product specifications
Comparison Series label Exact SKU or model
Product identity Indicates the catalogue family, such as SPC 5mm or SPC 6.5mm. Identifies a particular board, such as 6501 Bleached Oak or YN 819 Dove Grey.
Thickness Gives a series-level reference that should be checked against the selected product. 6501 Bleached Oak specifies a 6.5mm thickness.
Wear layer Should not be inferred from the series thickness alone. 6501 Bleached Oak specifies a 0.3mm wear layer. Other models require their own confirmation.
Size and packaging Series names do not establish every board's size or box coverage. 6501: 1,220 × 180mm; 8 planks per box; approximately 1.76m² nominal coverage per box before cutting and wastage.
Backing and fitting A thickness label does not fully describe the backing system or installation requirements. Confirm the nominated SKU's backing construction, installation instructions and compatibility with the prepared subfloor.
Performance evidence General range features are not automatically model-specific ratings. Request the relevant specification and supporting test documents for any performance requirements in the project brief.
Example: 6501 Bleached Oak

Its listed 1,220 × 180mm dimensions give a nominal area of 0.2196m² per plank. Eight planks provide approximately 1.76m² per box before cutting and wastage. Actual order quantities must allow for room layout, cuts and any agreed wastage allowance.

Do not apply 6501's 6.5mm thickness, 0.3mm wear layer or packaging figures to YN 819, YN 805 or W 504 without confirming those models individually.

04 / Selecting by room

Where does the intended room change the decision?

The same SPC flooring model should not automatically be specified for every room. Traffic, moisture sources, the condition of the existing floor and the selected product's instructions all matter.

SPC's rigid core provides a stable flooring structure, but it does not correct an uneven, damaged or unsound subfloor. Water-resistant planks also do not create a waterproof room or remove the need to address moisture below the floor.

Decorative appearance is a separate decision. Grey or brown wood-effect planks create a different interior character from a concrete-like finish, but colour alone does not establish technical suitability.

Enoch SPC flooring finishes shown with a living room interior

The interior presentation illustrates how light, grey and darker flooring finishes can change a room's appearance. Select the decorative finish separately from the board's construction and installation requirements.

01 / Residential

Living and dining areas

Consider the desired interior appearance, daily foot traffic, furniture movement and cleaning needs. Wood-look SPC can complement timber furniture or neutral wall finishes.

Confirm: Preferred model code, room dimensions, wear-layer information and subfloor condition.

02 / Commercial

Office and retail areas

Consider expected traffic, furniture or equipment loads, cleaning practices and any project-specific requirements for the finished floor.

Confirm: Actual usage, required product documentation, model suitability and any relevant performance criteria.

03 / Renovation

Existing-floor projects

A new SPC floor depends on the condition of the base beneath it. Existing coverings, damaged areas, moisture conditions and changes in floor height can affect the installation method.

Confirm: Existing floor type, levelness, removal requirements, door clearance and preparation scope.

Practical selection point

Choose the visual finish you prefer, then check whether that exact SKU is appropriate for the room and installation conditions. Product appearance and technical suitability should both be agreed before ordering.

05 / Supply and installation

Can Enoch supply and install the chosen SPC?

Yes. We supply SPC flooring and provide SPC installation services across West Malaysia, including Selangor, Kuala Lumpur, Johor and Penang.

You can discuss board supply separately from installation, or ask us to review the scope of a completed flooring job. Where needed, existing-floor removal and subfloor levelling can be included when assessed and agreed.

We also list skirting and L-Profile, A-Profile, U-Profile and T-Profile accessory categories. The suitable profile, colour, quantity and availability depend on the selected flooring and the actual room details.

STEP 01

Select the model

Choose a finish from our SPC flooring range and note its exact product code.

STEP 02

Assess the existing floor

Establish the current flooring type, site measurements, levelness, moisture concerns and other conditions that may affect fitting.

STEP 03

Agree preparation and fitting

Discuss whether the work includes board installation only, removal of old flooring, levelling or other agreed preparation.

STEP 04

Choose edges and transitions

Identify skirting, door thresholds, changes in floor height and any suitable finishing profiles for the room.

Board supply and a finished floor are different scopes

For a supply-only order, the focus is on the exact SPC SKU, quantity and delivery location. For a supply-and-install project, the existing floor, preparation requirements, fitting details and finishing accessories also need to be established.

Share your project requirements through our contact form so we can discuss the appropriate scope before it is agreed.

Before requesting an installed-floor quotation

Prepare the project location, intended rooms, approximate floor area, existing floor details and preferred SPC model. Photos or measurements of thresholds and changes in level may also help clarify the discussion.

06 / Buyer comparison guide

What should you compare between SPC manufacturers?

Look beyond the phrase "factory direct". A useful SPC flooring comparison should identify the manufacturing relationship, exact product, supporting information and scope included in the offer.

Use the same checks when comparing different quotations. This helps ensure that products, quantities and installation responsibilities are evaluated on a consistent basis.

Key buying checks for comparing SPC flooring manufacturers and suppliers
Buyer check Why it matters Enoch's answer
Manufacturing relationship and origin Establishes who manufactures the range and whether the seller is the manufacturer, sales representative or independent supplier. Our own factory in Malaysia manufactures our SPC catalogue range, and Enoch Malaysia handles sales and product enquiries.
Exact SKU and product data Prevents selection based only on a category name or general product description. Our catalogue includes named products. For example, 6501 Bleached Oak lists a 6.5mm thickness, 0.3mm wear layer and defined plank dimensions.
Matching product evidence Helps buyers compare the finish and information of the actual product being offered. We provide individual listings for YN 819 Dove Grey, YN 805 Walnut Brown, 6501 Bleached Oak and W 504 Silver Stone, among other catalogue models.
Supply versus installed scope Clarifies whether the offer includes boards alone or also preparation, installation and finishing work. We supply SPC and offer installation in West Malaysia. Existing-floor removal, levelling and suitable accessories can be discussed and included where needed and agreed.
Compare like with like.

For a meaningful quotation comparison, use the same model specifications, measured area, location, preparation requirements and installation scope. A lower or higher supply price alone does not establish whether two offers cover equivalent products or work.

07 / Frequently asked questions

SPC flooring questions, answered

Here are the main points to clarify when choosing an Enoch SPC model or discussing a flooring order.

Is Enoch's SPC flooring range made in Malaysia?

Yes. The SPC range featured in our website catalogue is manufactured by our owned factory in Malaysia. Our Enoch Malaysia team handles sales and product enquiries.

Are the LVT listings on the SPC page also SPC flooring?

No. LVT is a separate flooring category. Although our catalogue navigation also includes the LVT 5MM Series, our Malaysia SPC factory manufacturing statement does not establish where that separate LVT range is manufactured.

Can Enoch supply SPC flooring without installation?

Yes. We supply SPC flooring, and installation can be discussed separately. Provide your preferred model code, approximate area, required quantity and project location so the supply scope can be established.

Can installation include removal of old flooring or subfloor levelling?

Yes. Existing-floor removal and levelling can be included where they are needed and agreed. The existing floor condition and preparation requirements should be established before the installation scope is confirmed.

Does a 5mm or 6.5mm series name establish every model's construction?

No. A series label helps organise the catalogue, but the exact SKU's thickness, wear layer, backing, dimensions and installation requirements should be checked individually. Do not assume one model's specifications apply to another.

Plan your SPC flooring enquiry

Ready to discuss your SPC flooring project?

In summary, our Malaysia-made SPC range gives you named flooring models to compare, while our team can help establish the appropriate supply or installation scope for your West Malaysia project.

Tell us your project location, intended rooms, approximate floor area and preferred model code. If you are considering installation, include details of the existing floor and any removal, levelling or finishing requirements.

Whether you are sourcing flooring for a residential renovation, commercial interior or larger development, we can discuss the nominated SPC product and what your order needs to cover.

Discuss SPC flooring with Enoch
Topics