SPC assortment planning
How to Choose an SPC Flooring Range for Your Retail Store in Malaysia
Start with a compact SPC flooring range your staff can distinguish by intended use, finish and documented specifications. Our 5 mm warm wood-look, 6.5 mm grey wood-look, 9 mm wide-plank and Terrazzo models give you four options to compare when building your shortlist.
Use your shop’s actual enquiries to decide which options to display and which to order. Our SPC flooring overview introduces the series you can compare.
- Choose finishes customers can tell apart.
- Give staff the specifications they need to explain each model.
- Check ordering terms before committing to stock.
Customer requests
Which customer requests should your first SPC range cover?
Give customers a choice between a few finishes and specifications that address distinct requests. Use these four examples to decide which conversations your staff need to handle at the counter.
- “I want a warmer wood tone.”
- Start with honey oak and compare it with the customer’s cabinetry or wall colours.
- “I’d prefer a cooler grey. What wear layer does it have?”
- Show a grey wood-look option and explain its documented wear layer alongside the warmer model’s.
- “Do you have a wider, longer plank with an attached pad?”
- Point to a larger plank and show how much of its total thickness comes from the attached underlay.
- “Can I see a finish without wood grain?”
- Include a stone-look Terrazzo option if customers in your area ask for a speckled finish.
Opening assortment
How can Enoch’s listed series form a focused opening assortment?
Shortlist by model code and series so the swatch, specification and order refer to the same flooring. The four rows below show how to match an enquiry to a named model and what to check before stocking it.
- Customer request
- Warm wood look
- Enoch example
-
YN 818 Honey Oak
- Documented differentiator
- 5 mm SPC, 0.3 mm wear layer and approximately 2.196 m² per box.
- Check before stocking
- Compare the honey tone with finishes your customers already ask for.
- Customer request
- Cooler grey wood look
- Enoch example
-
6506 Silver Grey
- Documented differentiator
- 6.5 mm SPC, 0.5 mm wear layer and approximately 18.91 sq ft per box.
- Check before stocking
- Check whether the cooler finish and 0.5 mm wear layer answer requests your current range leaves open.
- Customer request
- Wider, longer plank with an attached pad
- Enoch example
-
7204 Grey
- Documented differentiator
- 9 mm total, including 2 mm IXPE underlay. It has a 0.5 mm wear layer, measures 1500 Ă— 228 mm and covers approximately 14.72 sq ft per box.
- Check before stocking
- Check demand for this plank format and how much storage space the cartons require.
- Customer request
- Stone-look alternative
- Enoch example
-
W 507 Light Grey
- Documented differentiator
- Light grey speckled finish in our SPC Terrazzo series.
- Check before stocking
- Confirm the model’s dimensions, thickness and box coverage with us before preparing a quote.
Counter conversations
Which specifications must staff be able to explain at the counter?
Train staff to compare total thickness, wear-layer thickness, included underlay, plank dimensions and coverage per box. Use those figures to explain the board and calculate the order, then check the customer’s intended use before recommending a model.
“What does 9 mm include?”
The 7204 board is 9 mm overall, made up of a 7 mm SPC core and 2 mm attached IXPE underlay.
“Do the 5 mm and 6.5 mm options have the same wear layer?”
YN 818 has a 0.3 mm wear layer and 6506 has a 0.5 mm wear layer. Check the intended space and its requirements before deciding which specification fits.
“How many boxes do I need?”
Use the selected model’s carton coverage. Put the floor area and coverage in the same unit, allow for layout cuts, then round up to a whole box.
| Model | Thickness | Wear layer | Plank size | Pieces per box | Approx. area per box |
|---|---|---|---|---|---|
| YN 818 Honey Oak | 5 mm | 0.3 mm | 1220 × 180 mm | 10 | 2.196 m² |
| 6506 Silver Grey | 6.5 mm | 0.5 mm | 1220 Ă— 180 mm | 8 | 18.91 sq ft |
| 7204 Grey | 9 mm total 7 mm SPC core + 2 mm IXPE underlay |
0.5 mm | 1500 Ă— 228 mm | 4 | 14.72 sq ft |
Display decisions
How many finishes should a shop introduce at the start?
Begin with visibly different finishes, then expand when your own enquiries, display space and stock risk justify it. A narrow display can miss some design requests. Several similar codes can make the display harder to explain and the stock harder to manage.
| Narrower initial range | Wider initial range |
|---|---|
| Fits stores with limited display space or enquiries that tend to cluster around a few distinct looks. | Fits stores that already receive varied design requests and have room to label, display and manage more codes. |
Screen colours can differ from the physical finish, so compare a physical sample under your shop lighting where possible. Browse our 5mm SPC series and 6.5mm SPC series for more finishes. Review the 9 mm and Terrazzo options if customers regularly ask for those formats.
Stock and repeat orders
What should you settle before offering a model for repeat orders?
Before allocating shelf space, confirm current ordering terms, pack quantity, finish details and how a repeat order would be handled for each shortlisted code. We publish box details for YN 818, 6506 and 7204 so you can compare pack sizes and estimate quantities.
- Shortlist the codes that answer different customer requests.
- Check current product and order terms with us for those exact models.
- Decide what to display and what to stock based on your space and enquiries.
- Review actual requests before adding similar finishes or expanding into another series.
Enoch Malaysia is the sales and marketing division of our factory. We handle trade enquiries through our contact locations in Puchong, Sungai Buloh, the Johor Bahru area and Penang.
Trade enquiry
Build a shortlist for your store
Tell us your shop’s location, the customers you serve and the two or three Enoch model codes you want to compare. We can discuss the current product and order terms for those models.
Discuss an SPC range for your store