SPC flooring buying guide · Malaysia

Should You Buy 5mm, 6.5mm or 9mm SPC Flooring in Bulk?

When comparing 5mm vs 6.5mm vs 9mm SPC flooring for a bulk order, choose the model whose wear layer, core and backing, plank size, intended use and carton coverage match your project. Our 5mm YN 818 has a 0.3mm wear layer, while 6.5mm 6506 and 9mm 7204 share a 0.5mm wear layer, with 7204’s overall thickness including 2mm of IXPE underlay.

SPC plank samples in oak, brown and grey finishes

Model specifications

Compare the three SPC models

Specification YN 818 Honey Oak 6506 Silver Grey 7204 Grey
Overall thickness5mm6.5mm9mm
Wear layer0.3mm0.5mm0.5mm
Build and IXPE backingNot specified on this model pageNot specified on this model page7mm SPC core + 2mm IXPE underlay
Plank size1220 Ă— 180mm1220 Ă— 180mm1500 Ă— 228mm
Count and coverage per box10 pieces · approx. 2.196 m² before cutting waste8 pieces · approx. 18.91 sq ft4 pieces · approx. 14.72 sq ft
Listed usesLiving rooms, bedrooms, dining areas and officesIndoor offices, showrooms and boutiques, among other interiorsIndoor spaces, including living rooms, offices and showrooms

YN 818 Honey Oak

Overall thickness
5mm
Wear layer
0.3mm
IXPE backing
Not specified on this model page
Plank size
1220 Ă— 180mm
Per box
10 pieces · approx. 2.196 m² before cutting waste
Listed uses
Living rooms, bedrooms, dining areas and offices

6506 Silver Grey

Overall thickness
6.5mm
Wear layer
0.5mm
IXPE backing
Not specified on this model page
Plank size
1220 Ă— 180mm
Per box
8 pieces · approx. 18.91 sq ft
Listed uses
Indoor offices, showrooms and boutiques, among other interiors

7204 Grey

Overall thickness
9mm
Wear layer
0.5mm
Build and backing
7mm SPC core + 2mm IXPE underlay
Plank size
1500 Ă— 228mm
Per box
4 pieces · approx. 14.72 sq ft
Listed uses
Indoor spaces, including living rooms, offices and showrooms

These specifications apply to the named models. If you want to see more finishes like the samples above, browse the SPC flooring range for an overview, then check the specifications for the exact model you plan to quote.

Reading the specification

What does “5mm, 6.5mm or 9mm” actually measure?

These figures describe overall thickness. Wear-layer thickness is a separate specification, and an attached underlay can count toward the overall figure.

Both 6506 and 7204 have a 0.5mm wear layer, even though their overall builds differ. When comparing quotes, record the wear layer separately and ask whether overall thickness includes backing. If the project specifies a service life or performance rating, check the applicable model documentation before approval.

7204 Grey layer guide

  • Surface: 0.5mm wear layer
  • Core: 7mm SPC
  • Backing: 2mm IXPE underlay

Overall thickness: 9mm. Record the wear-layer figure separately.

5mm SPC · Honey Oak

When is the 5mm YN 818 option worth shortlisting?

Shortlist YN 818 when its Honey Oak finish, 1220 × 180mm plank format and 0.3mm wear layer match your project brief. Each carton contains 10 planks and covers approximately 2.196 m² before cutting waste.

The sample shows a warm oak-effect grain you can compare with your wall colours and finishes. Give us the YN 818 code and plank size to identify the exact model, and check the 0.3mm wear layer against your project’s requirement.

YN 818 Honey Oak product details

YN 818 Honey Oak SPC flooring surface

6.5mm SPC · Silver Grey

What makes 6.5mm 6506 a different shortlist choice?

6506 Silver Grey has a 0.5mm wear layer and 1220 Ă— 180mm planks. Its eight-piece carton covers approximately 18.91 sq ft, and its listed indoor uses include offices, showrooms and boutiques.

  • Wear layer and finish. 6506 pairs a 0.5mm wear layer with the cool grey wood effect shown in the sample. YN 818 pairs 0.3mm with a warmer Honey Oak finish.
  • Pack quantity. Both models use the same plank format, with eight planks per box for 6506 and ten for YN 818.

6506 Silver Grey product details

6506 Silver Grey SPC flooring surface

9mm SPC · Grey

Why might a project shortlist 9mm 7204?

Shortlist 7204 Grey when your indoor project calls for longer, wider 1500 Ă— 228mm planks and accepts the 7mm SPC core with 2mm IXPE underlay. It has a 0.5mm wear layer and comes in a four-piece carton covering approximately 14.72 sq ft.

What the 9mm build includes. The overall figure includes the 2mm IXPE. When you compare quotes, confirm whether each supplier includes backing in its stated thickness.

What to confirm separately. Use the sample to compare the grey grain with your finish schedule. Check any required acoustic rating and subfloor tolerances against the applicable model documentation.

7204 Grey product details

7204 Grey 9mm SPC flooring surface

Project approval

Which specification should decide a bulk project approval?

Use your project’s acceptance criteria to approve the exact model. Start with the intended indoor area and required wear layer, then check the build, appearance, carton quantities and any documentation your project requires.

Criterion
Decision to make
Our model specifications
Indoor area and wear layer
Which wear layer does the intended area require?
YN 818 lists 0.3mm. 6506 and 7204 list 0.5mm. The 6506 applications include indoor offices, showrooms and boutiques.
Overall build and backing
Does your specification require an attached underlay or limit the overall thickness?
7204 is 9mm overall, including 2mm IXPE. Attached IXPE is not specified on the YN 818 or 6506 model pages.
Plank size and finish
Which plank format and finish match the approved interior?
YN 818 Honey Oak and 6506 Silver Grey are 1220 Ă— 180mm. 7204 Grey is 1500 Ă— 228mm.
Coverage and buying unit
What area must the cartons cover, and how much cutting allowance does the layout require?
YN 818 packs 10 pieces for approx. 2.196 m² before cutting waste. 6506 packs 8 for approx. 18.91 sq ft. 7204 packs 4 for approx. 14.72 sq ft.
Test or installation documents
Does approval depend on a fire, acoustic, slip or loading rating, or on an installation limit?
The dimensions and wear layers above help you shortlist. Obtain the applicable model-level documentation before approving any mandatory rating or installation condition.

Buying questions

Frequently asked questions

Can I use a single specification for every colour in a series?

Approve each model code individually. Check the build, wear layer and carton pack for each colour you plan to order.

What if my project requires IXPE backing?

Start with 7204, which specifies 2mm IXPE. If you are considering YN 818 or 6506, confirm the backing on the exact model before approval.

How should I compare carton coverage in different units?

Convert the figures to the same area unit for planning. Keep the original carton coverage and piece count on your order so the model and pack are clear.

Can a product photo replace a finish sample?

Use the photo to shortlist colours and grain, then compare a physical sample under the project’s lighting before approving the finish.

Do the listed indoor uses establish a commercial traffic class?

Use the listed applications as a starting point. If your project calls for a specific traffic classification, request the applicable model documentation before approval.

Bulk order enquiry

What should be shortlisted before requesting the bulk quote?

In summary, shortlist one or two model codes that meet your interior brief and bulk SPC flooring specification. Send us the intended use, approximate floor area and project destination so we can discuss the model and order scope. Using “7204 Grey” in your enquiry identifies the build, plank format and carton pack behind the 9mm thickness.

Discuss the right SPC model for your order
Topics